RLFM-117 Cavitation Appratus

Price: ----------

SKU: RLFM-117

The apparatus has been designed to demonstrate the phenomenon of cavitation. The present set-up consists of a test section made of Acrylic having conversion and diversion section. Pressure tapings at appropriate position are provided. This test section is having one control valve at upstream side to regulate the water flow rate. Two pressure gauges are connected to these taping which give the pressure readout at the time of flow passing through this test section. The unit is self-contained close circuit type with sump tank, measuring tank and centrifugal pump. Flow through test section can be regulated with the help provided by-pass and control valve.

EXPERIMENTATION :

➢To observe the phenomenon of cavitation. To compare the theoretical and actual pressures at cavitation condition.

UTILITIES REQUIRED :

➢Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts.

➢Water Supply: Initial Fill.

➢Floor Drain Required.

➢Floor Area Required: 1.5 m x 1.0 m

TECHNICAL DETAILS :

➢Test Section : Material Acrylic

➢Pressure Gauge : 0-4 kg/cm2

➢Vacuum Gauge : 0-760 mmHg

➢Water Circulation : By Pump, Crompton/Standard make.

➢Flow Measurement : Using Measuring Tank, Capacity: 40 liters

➢Sump Tank : Capacity 60 liters

➢Stop Watch : Electronic

➢Control Panel Comprises of : Standard make On/Off Switch, Mains Indicator, etc. Tanks will be made of Stainless Steel.

➢An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus

➢The whole setup is well designed and arranged on a rigid structure painted with PU Paint